Custom Spur Gear Racks in Michigan

custom spur gear racks made in west michigan mds of michigan

When a machine needs straight-line motion, a spur gear rack is often one of the simplest and most reliable ways to get it done. Spur gear racks work with a mating pinion gear to convert rotary motion into linear travel.

At MDS of Michigan, we help customers source both stock and custom spur gear racks for industrial equipment across Michigan, the Midwest, and beyond. Whether you need a standard 4-foot rack or a custom gear rack made from a drawing, sample, or application requirement, our team can help point you in the right direction.

Simple explanation: A spur gear rack is a straight gear that meshes with a round pinion gear to move a machine part forward, backward, up, down, or side to side.

Shop Spur Gear Racks Online

Stock and Custom Spur Gear Racks from MDS of Michigan

MDS of Michigan is located in Jenison, Michigan, near Grand Rapids. We supply mechanical, electrical, and power transmission products for maintenance teams, machine builders, manufacturers, farms, and industrial facilities.

Our team can help with both standard and custom gear rack needs, including:

  • Stock spur gear racks
  • Custom spur gear racks
  • Replacement gear racks
  • Gear racks made from a drawing
  • Gear racks made from a sample
  • 14.5° and 20° pressure angle options
  • Diametral pitch and metric module gear racks
  • Drilled, tapped, countersunk, or counterbored mounting holes
  • Rack sections machined for continuous travel

When Do You Need a Custom Spur Gear Rack?

A stock gear rack works well when your application uses a standard length, pitch, pressure angle, and material. But not every machine is built around a standard part.

You may need a custom spur gear rack if the rack has special mounting holes, a non-standard length, a special material, machined ends, a unique finish, or needs to match an existing worn rack on older equipment.

Quick tip: If you are not sure what gear rack you have, send photos, measurements, any markings, and a picture of the mating pinion gear. MDS of Michigan can help review the details.

Common Spur Gear Rack Applications

Spur gear racks are used in many industrial and mechanical systems where controlled linear motion is needed. They are commonly found in:

  • Machine tool equipment
  • Automation systems
  • Material handling equipment
  • Agricultural equipment
  • Packaging machinery
  • Industrial production equipment
  • Linear slides, gates, lifts, and positioning systems

Information Needed for a Spur Gear Rack Quote

The more information you can provide, the faster our team can review your request and quote the correct rack. When possible, include:

Information NeededWhy It Matters
QuantityHelps quote the correct number of rack sections.
Rack LengthCommon lengths include 1 ft, 2 ft, 4 ft, 6 ft, and 12 ft, with custom lengths available.
Pressure AngleCommon options are 14.5° and 20°. The rack and pinion must match.
Pitch or ModuleExamples include 16DP, 20DP, 24DP, Module 2, or Module 3.
MaterialOptions may include steel, stainless steel, alloy steel, aluminum, brass, bronze, or plastic.
Mounting HolesLet us know if holes need to be drilled, tapped, countersunk, counterbored, or matched to an existing rack.

Get a Custom Spur Gear Rack Quote

14.5° vs 20° Spur Gear Racks

One of the most important details when replacing a spur gear rack is the pressure angle. A 14.5° rack should run with a 14.5° pinion gear, and a 20° rack should run with a 20° pinion gear.

If the pressure angle does not match, the gear and rack may not mesh correctly. That can lead to noise, uneven wear, binding, broken teeth, and machine downtime.

Important: Do not mix pressure angles. Match the rack to the mating pinion gear before ordering a replacement.

Request a Custom Spur Gear Rack Quote in Michigan

Need a stock or custom spur gear rack? Tell us about your application, and MDS of Michigan will help review the details. You can request a quote using your dimensions, drawing, sample, photos, or application requirements.

For the best quote, include any available drawings, photos, measurements, pitch or module, pressure angle, material, finish, mounting hole requirements, and whether the rack sections need to be machined for continuous travel.

Request a Spur Gear Rack Quote

MDS of Michigan can help source stock gear racks or quote custom spur gear racks made to your dimensions, drawing, sample, or application needs.

Request a Gear Rack Quote

Local Power Transmission Support from MDS of Michigan

MDS of Michigan has been helping industrial customers with mechanical, electrical, and power transmission products for decades. From our headquarters in Jenison, MI, we support customers throughout Grand Rapids, West Michigan, the Midwest, and across the United States.

Whether you need one replacement gear rack or multiple custom rack sections for a larger project, our team is ready to help.

MDS of Michigan
2336 Wilshere Drive
Jenison, MI 49428
Phone: (800) 686-1627
Email: sales@mdsofmi.com